jabberd2 win32

router.exe -I

router.exe -U

123 Responses to “jabberd2 win32”

Pages: « 1 2 [3]

1. 74
   August 28th, 2008 at 13:56 Adam
   

   Ransum: Note the red marked comments at: http://www.slproweb.com/products/Win32OpenSSL.html
   This are some problems with wonky SP3 I suppose, can you try on SP2 machine? I may try running at SP3 later-on, but I still do my development on SP2, since they’re so many negative opinions about latest SP3 MS achievement.

2. 75
   September 4th, 2008 at 08:30 Claudio
   

   I’ve enabled <auto-create/> in sm.xml.
   I still have the problem with the client being stuck in status “connecting” and the server trying to connect to osbitalia.local. I’ve tried changing some parameters, but with no luck. Any news?

3. 76
   September 9th, 2008 at 13:11 ransum
   

   I’m on a corp. network here… so downgrading to SP2 is no option at all. It seems this OpenSSL-Problem affects Windows 2003 SP1 as well then… ?

   I guess it’s neither possible to use jabberd2 without that SSL stuff, is it?

4. 77
   September 19th, 2008 at 17:45 sherif
   

   Hi,

   Just wondering, is there a way to skip the authentication step all together? Just providing a string to use as a screen name for that session.

   Thanks

    

5. 78
   October 2nd, 2008 at 20:13 luis
   

   When i try to install the software i have this error msg. I`have proved in a wk3 SP2 and XP too, but i have the same error.

   “Service Jabber 2 C2S (jabberd2c2s) failed to start. Verify that you have sufficient privileges to start system services”

   Thanks

6. 79
   October 22nd, 2008 at 17:44 David
   

   I have tried running the installer on 2 systems now but everytime it fails to run. It just closes the installer right after it opens. I have tried redownloading the installer file 3-4 times but still get the same problem.

7. 80
   October 29th, 2008 at 11:46 Valeriy
   

   I have same problem as in post #79(David), download installation jabberd-2.2svn688-win32.msi, short blink and nothing…
   WinXP SP3

8. 81
   October 29th, 2008 at 12:01 Valeriy
   

   Answer to my post and 79(David) – install VC++ redistr and OpenSSL

9. 82
   November 12th, 2008 at 21:57 Jon
   

   It appears that the version of the VC++ redistr that you link to is the wrong one for the most recent version of OpenSSL. They provide a link to a different version (also from Microsoft) on the Shining Light page. That allowed OpenSSL to install without errors for me on Windows Server 2003 SP1. Unfortunately, I now can’t get the Jabber .msi to launch on that server.

10. 83
    November 27th, 2008 at 06:56 ja
    

    I’m confused. ”
    “Windows platforms prior to Windows 2000 are not supported, so this won’t work on Windows 95/98/ME/NT.
    Windows ME was released after XP. Windows 2000, XP, 2003, Vista, and 2008 are all based on Windows NT. What does this thing run on?

11. 84
    December 12th, 2008 at 09:12 chendd
    

    Answer to my post and 79(David) – install VC++ redistr and OpenSSL

12. 85
    December 12th, 2008 at 11:55 Vlad
    

    Hello all!
    May I config for use syslog server? I don’t understand where I must write syslog server host name.
    What is “log facility”?
    Thanx.

13. 86
    December 18th, 2008 at 04:22 B
    

    Hi,

    I want to install the jabberd2 on a windows 2003 server using windows authentication. Can anyone give step by step directions on how to implement this. Any help would be greatly appreciated. Any examples of the XML files.

14. 87
    January 6th, 2009 at 12:32 David
    

    I see the binaries, where is the source?

15. 88
    January 6th, 2009 at 12:46 David
    

    OK I found the source, but the SVN won’t check out. I try to check out SVN http://jabberd2.xiaoka.com/browser but it’s like “Options of http://jabberd2.xiaoka.com/browser could not read status line” connection was closed by proxy server http://jabberd2.xiaoka.com/

16. 89
    January 6th, 2009 at 12:57 David
    

    then I tried http://jabberd2.xiaoka.com/browser/trunk/win32 because I need the windows source, not the Tarball… and it said the XML data was not well-formed. Please help! I cannot figure this out

17. 90
    January 6th, 2009 at 13:07 Adam
    

    David: Just download the source as stated at http://jabberd2.xiaoka.com/ or checkout the SVN trunk as described at: http://jabberd2.xiaoka.com/wiki/Development

18. 91
    January 19th, 2009 at 09:12 leo
    

    help me,how to use the udns-0.0.9-win32+VC8.patch file ?

19. 92
    January 20th, 2009 at 12:29 pete
    

    Did you ever figure out what Claudio’s issue was? (#75).  I’m getting the same thing on my test system…  I am able to successfully authenticate (via NTLogon and the provided instructions) — working messages in the other log files — but as soon as I do that, client sends an iq/bind request that the server never responds to… immediately thereafter, s2s.log gets filled with a bunch of messages for “outgoing connection for ‘realm.company.com’” disconnecting.

    My local machine (running the server) is machine.realm.company.com … realm.company.com is not running an xmpp server, but I’d like to use realm.company.com’s domain auth + run an internal xmpp / MUC server.  (any tips on this?)

    Thanks

20. 93
    January 22nd, 2009 at 04:21 Shawn
    

    I run the installer and the screen comes up for just a second and disappears.  Is there any fix for this problem?  Thank you.

21. 94
    January 29th, 2009 at 13:47 Durokhan
    

    Im have the next inssue “Service Jabber 2 c2s (jaberd2c2s) failed to start. Verify that you have sufficient privileges to start system services.”

    What should i do =/

22. 95
    January 29th, 2009 at 17:40 Adam
    

    Too bad I don’t have Vista. Thinking….
    Durokhan, Shawn: What version of OpenSSL you have installed? It must have something to do with Vista and OpenSSL.
    I’ll try to prepare installer-less debug version (zipped binaries), so we may diagnose the problem better.

23. 96
    February 1st, 2009 at 16:58 Samsonov
    

    It looks like the Cyrus SASL authentication bug, described in ticket 246, is still present in Windows version (its status was set to “fixed” more than 5 months ago, before the release of 2.2.4). As a result, the only client able to connect is Psi. Other implementations, like Miranda, Exodus and Pandion, simply fail; those like Pidgin and JAJC even crash each time the user tries to come online.

    And I still wonder, which “official” version does “2.2svn688-win32″ correspond to? Is it 2.2.0 or something newer? Considering it was published on 2008-08-18, the most probable is 2.2.3 or beta 2.2.4.

24. 97
    February 3rd, 2009 at 18:31 Jerry
    

    Shawn: “I run the installer and the screen comes up for just a second and disappears.  Is there any fix for this problem?  ”

    I had the same problem. I’m running XP.  I had to reinstall OpenSSL and select the Copy OpenSSL DLL to the Windows system directory.  That fixed it.

25. 98
    February 17th, 2009 at 13:10 Steve Holt
    

    This installer doesn’t work on Win 2003 R2 x64. The installer wizard appears for a fraction of a second then disappears.

26. 99
    February 18th, 2009 at 00:34 lee
    

    Hello,

    I’m trying to get jabber setup on my network to see if it’s better then what live communication server 2007.  It seems to be all setup pretty close to the way it’s suppose to, but everytime I try to create a user I get a ‘not-authorized’ error.  Any help would be appreciated and below are the logs from the c2s.log mile.

    Tue Feb 17 15:27:46 2009 [notice] [276] [10.1.1.72, port=63694] connect
    Tue Feb 17 15:27:48 2009 [notice] [276] packet sent before session start, closing stream
    Tue Feb 17 15:27:48 2009 [notice] [276] [10.1.1.72, port=63694] disconnect jid=unbound, packets: 2
    Tue Feb 17 15:28:09 2009 [notice] [276] [10.1.1.72, port=63696] connect
    Tue Feb 17 15:28:09 2009 [notice] [276] [10.1.1.72, port=63696] disconnect jid=unbound, packets: 1
    Tue Feb 17 15:28:50 2009 [notice] [288] [10.1.1.72, port=63703] connect
    Tue Feb 17 15:28:51 2009 [notice] [288] [10.1.1.72, port=63703] disconnect jid=unbound, packets: 1
    Tue Feb 17 15:30:13 2009 [notice] [284] [10.1.1.72, port=63707] connect
    Tue Feb 17 15:30:13 2009 [notice] [284] [10.1.1.72, port=63707] disconnect jid=unbound, packets: 1
    Tue Feb 17 15:32:57 2009 [notice] [276] [10.1.1.72, port=63728] connect
    Tue Feb 17 15:32:58 2009 [notice] [276] [10.1.1.72, port=63728] disconnect jid=unbound, packets: 1

27. 100
    February 19th, 2009 at 15:06 Adam
    

    You are all right, jabberd2 win32 just deserves updating. I am very sorry that I haven’t done it yet. I am just stuck with my business activities, and very very busy nowadays. I just want to assure you all that I haven’t forgot about this project.

28. 101
    March 5th, 2009 at 13:37 Adam
    

    jabberd2 win32 project is at last updated! New binaries were build using Visual Studio 2008 SP1 and require its runtime, however most of you may have this runtime already installed, if NOT setup will ask to do so. OpenSSL libraries are included in the build, so no more problems with OpenSSL.

29. 102
    March 5th, 2009 at 14:06 nanoANT » Blog Archive » jabberd2 win32 hits SVN rev 752 and Visual Studio 2008 (SP1)
    

    [...] a while I had put the jabberd2 win32 project aside, finally I have revived it. Here are some news about [...]

30. 103
    April 5th, 2009 at 05:44 subash
    

    Is there any jabber src available that can be compiled in visual studio 6?

31. 104
    April 13th, 2009 at 19:27 DavisPreston
    

    I need some more details on making Active Directory integration work.  I am a NT network guy with absolutely NO xml coding experience.  I tried to follow the directions provided above but I was unsuccessful.  Honestly I was kinda lost in the coding.  There is a reason I got into the network side and not programming side!!!

    When I edited the c2s.xml file as described above the jabber c2s service would not start on my server.  I edited both sm.xml and c2s.xml following the above directions as best I could.  Not be a programmer AT ALL I was sorta lost. 

    Could someone please give me some more detailed instructions on changing the xml code to work with Active Directory.

    Thank you in advance.

32. 105
    June 10th, 2009 at 17:42 Ryan Thomnpson
    

    For NTLOGON I used the following config and it works perfectly:

    In c2s.xml

    For the MODULE:

    <!– Backend module to use –>
    <module>ntlogon</module>

    For the ID:

    <id realm=’yourdomainnamehere.local’
    pemfile=’./server.pem’
    register-enable=’true’
    require-starttls=’true’
    >YOURDOMAINNAMEHERE.LOCAL</id>

    For the MECHANISMS:

    <!– Available authentication mechanisms –>
    <mechanisms>

    <!– These are the traditional Jabber authentication mechanisms.
    Comment out any that you don’t want to be offered to clients.
    Note that if the auth/reg module does not support one of
    these mechanisms, then it will not be offered regardless of
    whether or not it is enabled here. –>
    <traditional>
    <plain/>
    <!– <digest/> –>
    </traditional>

    <!– SASL authentication mechanisms. Comment out any that you
    don’t want to be offered to clients. Again, if the auth/reg
    module does not support one of these mechanisms, then it will
    not be offered. –>
    <sasl>
    <plain/>
    <!– <digest-md5/> –>
    <!–
    <anonymous/>
    <gssapi/>
    –>
    </sasl>

    </mechanisms>

    In sm.xml you enable auto create like this:

    <!– User options –>
    <user>
    <!– By default, users must explicitly created before they can start
    a session. The creation process is usually triggered by a c2s
    component in response to a client registering a new user.

    Enableing this option will make it so that a user create will be
    triggered the first time a non-existant user attempts to start
    a session. This is useful if you already have users in an
    external authentication database (eg LDAP) and you don’t want
    them to have to register. –>

    <auto-create/>

33. 106
    August 25th, 2009 at 08:11 wuyazhou
    

    Hello!
    I got a problem!
    I finish install jabberd-2.2svn752-win32.msi in my system(windows xp with sp2), and i configured basic items in c2s.xml sm.xml.But when i use pandion(a jabberd client) to connect server.It can’t success with error info below in c2s.log:
    Tue Aug 25 12:12:44 2009 [notice] starting up
    Tue Aug 25 12:12:44 2009 [info] process id is 3844, written to ./c2s.pid
    Tue Aug 25 12:12:44 2009 [notice] modules search path: modules
    Tue Aug 25 12:12:44 2009 [info] loading ‘mysql’ authreg module
    Tue Aug 25 12:12:44 2009 [notice] initialized auth module ‘mysql’
    Tue Aug 25 12:12:44 2009 [notice] [0d915b6d731645c] configured; realm=0d915b6d731645c, registration enabled
    Tue Aug 25 12:12:44 2009 [notice] attempting connection to router at 127.0.0.1, port=5347
    Tue Aug 25 12:12:44 2009 [notice] connection to router established
    Tue Aug 25 12:12:44 2009 [notice] [172.7.23.23, port=5222] listening for connections
    Tue Aug 25 12:12:44 2009 [notice] ready for connections
    Tue Aug 25 12:12:55 2009 [notice] [268] [172.7.23.23, port=7385] connect
    Tue Aug 25 12:12:55 2009 [notice] [268] [172.7.23.23, port=7385] disconnect jid=unbound, packets: 0
    Tue Aug 25 12:12:56 2009 [notice] [292] [172.7.23.23, port=7387] connect
    Tue Aug 25 12:12:56 2009 [notice] [292] [172.7.23.23, port=7387] disconnect jid=unbound, packets: 0
    Tue Aug 25 12:12:57 2009 [notice] [284] [172.7.23.23, port=7389] connect
    Tue Aug 25 12:12:57 2009 [notice] [284] [172.7.23.23, port=7389] disconnect jid=unbound, packets: 0
    Tue Aug 25 13:15:32 2009 [notice] [284] [172.7.23.23, port=7667] connect
    Tue Aug 25 13:15:32 2009 [notice] [284] [172.7.23.23, port=7667] disconnect jid=unbound, packets: 0
    Tue Aug 25 13:15:33 2009 [notice] [268] [172.7.23.23, port=7669] connect
    Tue Aug 25 13:15:33 2009 [notice] [268] [172.7.23.23, port=7669] disconnect jid=unbound, packets: 0
    Can you help me?

34. 107
    August 25th, 2009 at 08:20 wuyazhou
    

    another question!
    where can i get the jabberd2 windows’ souce code?
    I want to expand the functions of that!

35. 108
    September 7th, 2009 at 12:23 E-mannen
    

    The vcredist_x86.exe link takes one to the 2005 version of the file when the 2008 version is needed for install.
    The link should go here instead:
    http://www.microsoft.com/downloads/thankyou.aspx?familyId=a5c84275-3b97-4ab7-a40d-3802b2af5fc2&displayLang=en

36. 109
    September 16th, 2009 at 13:44 Adam
    

    editwuyazhou: Source code is available at official project page: http://codex.xiaoka.com/wiki/jabberd2:start
    My page is just extended howto about win32 build I maintain and provides win32 platform binaries.

    E-mannen: Thanks a lot for noticing bad link.

37. 110
    September 22nd, 2009 at 10:13 duanyanhui@126.com
    

    Tue sep 22 16:02:42 2009 [notice] [248] [192.168.0.29,port = 5345] connect
    Tue sep 22 16:02:44 2009 [notice] [248] [192.168.0.29.port = 5345] disconnect  jid=unbound, packets: 1 

38. 111
    September 22nd, 2009 at 10:23 duanyanhui
    

    hello,
    I finish install jabberd-2.2svn752-win32.msi in my system(windows xp, when i use pidgin(a jabberd client) to connect server. It can’t success, the error infomatiom in c2s.log as follows:

    Tue sep 22 16:02:42 2009 [notice] [248] [192.168.0.29,port = 5345] connect
    Tue sep 22 16:02:44 2009 [notice] [248] [192.168.0.29.port = 5345] disconnect  jid=unbound, packets: 1 

    i try many tiimes ,did not resolve it until now, how can i do?

39. 112
    September 22nd, 2009 at 16:21 jasam
    

    hello,
    I  install jabberd-2.2svn752-win32.msi in my system(windows xp ), when i use miranda(a jabberd client) to connect server.It can’t success with error in c2s.log as follows:
    registe user is successful, but login is failed with message authentication failed for (user name).

    Tue Aug 25 13:15:33 2009 [notice] [268] [172.7.23.23, port=7669] connect
    Tue Aug 25 13:15:33 2009 [notice] [268] [172.7.23.23, port=7669] disconnect jid=unbound, packets: 0

    pls tell me how to resolve it ?

40. 113
    September 22nd, 2009 at 16:53 Adam
    

    jasam: Try with PSI if it works (look into XML log), PSI is more descriptive than Miranda regarding errors, or try turning detailed logging for Jabber in Miranda (show me you XML log).
    This may be some misconfiguration of the server or Miranda using some unsupported authentication method.
    Especially when using jabberd2 with Windows authentication it requires plain passwords (see NTlogon section in the article above) while you may have still enabled digest or Miranda refuses using PLAIN passwords (AFAIR there was some settings to allow that).
    So for safety you may enable PLAIN passwords in Miranda but require TLS in jabberd2 configuration.

41. 114
    September 24th, 2009 at 17:45 gundla
    

    Hey, I am new to XMPP and in quest to explore it, have installed jabberd2 with the help of binaries provided here. Thanks and I think it is a great page for all windows developers. Anyways, when i try to communicate to the server thorugh pandion, i get the following errors: -

    Thu Sep 24 07:37:21 2009 [notice] starting up
    Thu Sep 24 07:37:21 2009 [info] process id is 3788, written to ./c2s.pid
    Thu Sep 24 07:37:21 2009 [notice] modules search path: modules
    Thu Sep 24 07:37:21 2009 [info] loading ‘mysql’ authreg module
    Thu Sep 24 07:37:21 2009 [notice] initialized auth module ‘mysql’
    Thu Sep 24 07:37:21 2009 [notice] [r] configured; realm=r, registration enabled
    Thu Sep 24 07:37:21 2009 [notice] attempting connection to router at 127.0.0.1, port=5347
    Thu Sep 24 07:37:21 2009 [notice] connection to router established
    Thu Sep 24 07:37:21 2009 [notice] [0.0.0.0, port=5222] listening for connections
    Thu Sep 24 07:37:21 2009 [notice] ready for connections
    Thu Sep 24 07:58:59 2009 [notice] [356] [127.0.0.1, port=1208] connect
    Thu Sep 24 07:58:59 2009 [notice] [356] [127.0.0.1, port=1208] disconnect jid=unbound, packets: 0

    Could any one please point out as what am i doing wrong. The connection settings I have set on the pandion are: -
    server: localhost
    port:5222

    Thanks a ton !!!

42. 115
    September 24th, 2009 at 17:50 gundla
    

    also, the only change i made in c2s.xml was in the module section. i changed it to mysql. i have created the jabberd2 database in mysql and provided with right login details.

    should i be making more changes in the router area or local area. please let me know.

    thanks again

43. 116
    September 24th, 2009 at 22:15 beater
    

    trying to build under visual studio.  I read this line here “open win32/jabberd2.sln and build all projects”.  Where the heck is this project file?  I downloaded the source and all the packages here but I do not see the VS project file.

44. 117
    October 22nd, 2009 at 03:58 duanyanhui
    

    hello Aadm,
    I met a error message box when using miranda clent to connect jabberd2 server and clicking online button ,  the jabberd2 server was conpiled by myself. but i try the jabberd-2.2svn752-win32.msi  server that download in the website is successful,  i think it may be xml file is not right.
    the message box with error information is bellow:
            session manager for requested domain is not  available.

    Pls help me once again.

45. 118
    October 23rd, 2009 at 10:52 rahul
    

    Fri Oct 23 14:19:18 2009 [notice] starting up
    Fri Oct 23 14:19:18 2009 [info] process id is 4556, written to ./c2s.pid
    Fri Oct 23 14:19:18 2009 [notice] modules search path: modules
    Fri Oct 23 14:19:18 2009 [info] loading ‘sqlite’ authreg module
    Fri Oct 23 14:19:18 2009 [notice] initialized auth module ‘sqlite’
    Fri Oct 23 14:19:18 2009 [notice] [dentsu.in] configured; realm=dentsu.in, registration enabled
    Fri Oct 23 14:19:18 2009 [notice] attempting connection to router at 192.168.187.12, port=5347
    Fri Oct 23 14:19:18 2009 [notice] connection to router established
    Fri Oct 23 14:19:18 2009 [notice] [0.0.0.0, port=5222] listening for connections
    Fri Oct 23 14:19:18 2009 [notice] ready for connections
    Fri Oct 23 14:19:22 2009 [notice] [280] [192.168.188.92, port=3163] connect
    Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3164] connect
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3165] connect
    Fri Oct 23 14:19:22 2009 [notice] [312] [192.168.188.92, port=3166] connect
    Fri Oct 23 14:19:22 2009 [notice] [324] [192.168.188.92, port=3167] connect
    Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3168] connect
    Fri Oct 23 14:19:22 2009 [notice] [348] [192.168.188.92, port=3169] connect
    Fri Oct 23 14:19:22 2009 [notice] [280] [192.168.188.92, port=3163] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3164] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3165] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3170] connect
    Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3171] connect
    Fri Oct 23 14:19:22 2009 [notice] [312] [192.168.188.92, port=3166] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [324] [192.168.188.92, port=3167] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3168] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3172] connect
    Fri Oct 23 14:19:22 2009 [notice] [348] [192.168.188.92, port=3169] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3171] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3172] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3170] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3173] connect
    Fri Oct 23 14:19:22 2009 [notice] [340] [192.168.188.92, port=3174] connect
    Fri Oct 23 14:19:22 2009 [notice] [296] [192.168.188.92, port=3175] connect
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3173] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3176] connect
    Fri Oct 23 14:19:22 2009 [notice] [340] [192.168.188.92, port=3174] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [296] [192.168.188.92, port=3175] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3176] disconnect jid=unbound, packets: 0
    Fri Oct 23 14:19:33 2009 [notice] shutting down

46. 119
    November 6th, 2009 at 02:15 Jon Heese
    

    I’ve installed Jabberd2 on a server, with the “ntlogon” module enabled, and when I try to connect, the c2s.log shows that the login was successful, but my XMPP client (Exodus) just sits for a few minutes on “Connected – Authenticating”, and then errors out to this following message:
    “There was an error trying to authenticate you.
    Either you used the wrong password, or this account is already in use by someone else.”

    My c2s.log shows this:
    “Thu Nov 05 17:18:08 2009 [notice] [276] [192.168.27.100, port=3593] connect
    Thu Nov 05 17:18:09 2009 [notice] ntlogon: user ‘heese’, realm ‘jonheese.local’ logged in
    Thu Nov 05 17:18:09 2009 [notice] [276] SASL authentication succeeded: mechanism=PLAIN; authzid=heese@jonheese.local, TLS negotiated
    Thu Nov 05 17:18:09 2009 [notice] [276] bound: jid=heese@jonheese.local/JESTER
    Thu Nov 05 17:20:45 2009 [notice] [276] packet sent before session start, closing stream
    Thu Nov 05 17:20:45 2009 [notice] [276] [192.168.27.100, port=3593] disconnect jid=heese@jonheese.local/JESTER, packets: 2″

    Can anyone tell me what I’m doing wrong?  Thanks.
    jabberd2@jonheese.com

    Regards,
    Jon Heese

47. 120
    November 6th, 2009 at 02:26 Jon Heese
    

    Never mind, I figured it out…  I had disabled all of the <mechanisms> but “plain”, and apparently, I needed to disabled ALL the <mechanisms>, and leave only the <ssl-mechanisms> “plain”…

    Counterintuitive from the way the documentation explains it, but whatever, I’m just happy I can finally get a user logged in after all this time working on it.

    Regards,
    Jon Heese

48. 121
    February 26th, 2010 at 00:34 chat interno - psicofxp.com
    

    [...] Con un pentium 100 y 256 Mbytes lo haces. Si no, algun build para windows debe haber… aca: http://www.nanoant.com/projects/jabberd2-win32 [...]

49. 122
    May 18th, 2010 at 22:50 Chris
    

    I’m trying to run a server using Windows Authentication on a Domain. Does the Jabber Server need to be running on the same box as the domain controller? If not, what needs to be done to set it up?

50. 123
    June 3rd, 2010 at 19:33 WPN
    

    im looking to implement a IM server. I stumbled upon this one but im reading a lot of problems…

    i was planning on running it in a domein that is only on win2k8 servers and win7 clients..
    i could consider installing linux on an old machine just to serve for this server if the windows server is not functioning propperly….. any advise on this is welcome

Pages: « 1 2 [3]

Leave a Reply