Comments on: jabberd2 win32

By: WPN

WPN — Thu, 03 Jun 2010 17:33:04 +0000

im looking to implement a IM server. I stumbled upon this one but im reading a lot of problems…

i was planning on running it in a domein that is only on win2k8 servers and win7 clients..
i could consider installing linux on an old machine just to serve for this server if the windows server is not functioning propperly….. any advise on this is welcome

By: Chris

Chris — Tue, 18 May 2010 20:50:58 +0000

I’m trying to run a server using Windows Authentication on a Domain. Does the Jabber Server need to be running on the same box as the domain controller? If not, what needs to be done to set it up?

By: chat interno - psicofxp.com

chat interno - psicofxp.com — Thu, 25 Feb 2010 22:34:43 +0000

[...] Con un pentium 100 y 256 Mbytes lo haces. Si no, algun build para windows debe haber… aca: http://www.nanoant.com/projects/jabberd2-win32 [...]

By: Jon Heese

Jon Heese — Fri, 06 Nov 2009 00:26:22 +0000

Never mind, I figured it out… I had disabled all of the but “plain”, and apparently, I needed to disabled ALL the , and leave only the “plain”…

Counterintuitive from the way the documentation explains it, but whatever, I’m just happy I can finally get a user logged in after all this time working on it.

Regards,
Jon Heese

By: Jon Heese

Jon Heese — Fri, 06 Nov 2009 00:15:10 +0000

I’ve installed Jabberd2 on a server, with the “ntlogon” module enabled, and when I try to connect, the c2s.log shows that the login was successful, but my XMPP client (Exodus) just sits for a few minutes on “Connected – Authenticating”, and then errors out to this following message:
“There was an error trying to authenticate you.
Either you used the wrong password, or this account is already in use by someone else.”

My c2s.log shows this:
“Thu Nov 05 17:18:08 2009 [notice] [276] [192.168.27.100, port=3593] connect
Thu Nov 05 17:18:09 2009 [notice] ntlogon: user ‘heese’, realm ‘jonheese.local’ logged in
Thu Nov 05 17:18:09 2009 [notice] [276] SASL authentication succeeded: mechanism=PLAIN; authzid=heese@jonheese.local, TLS negotiated
Thu Nov 05 17:18:09 2009 [notice] [276] bound: jid=heese@jonheese.local/JESTER
Thu Nov 05 17:20:45 2009 [notice] [276] packet sent before session start, closing stream
Thu Nov 05 17:20:45 2009 [notice] [276] [192.168.27.100, port=3593] disconnect jid=heese@jonheese.local/JESTER, packets: 2″

Can anyone tell me what I’m doing wrong? Thanks.
jabberd2@jonheese.com

Regards,
Jon Heese

By: rahul

rahul — Fri, 23 Oct 2009 08:52:00 +0000

Fri Oct 23 14:19:18 2009 [notice] starting up
Fri Oct 23 14:19:18 2009 [info] process id is 4556, written to ./c2s.pid
Fri Oct 23 14:19:18 2009 [notice] modules search path: modules
Fri Oct 23 14:19:18 2009 [info] loading ‘sqlite’ authreg module
Fri Oct 23 14:19:18 2009 [notice] initialized auth module ‘sqlite’
Fri Oct 23 14:19:18 2009 [notice] [dentsu.in] configured; realm=dentsu.in, registration enabled
Fri Oct 23 14:19:18 2009 [notice] attempting connection to router at 192.168.187.12, port=5347
Fri Oct 23 14:19:18 2009 [notice] connection to router established
Fri Oct 23 14:19:18 2009 [notice] [0.0.0.0, port=5222] listening for connections
Fri Oct 23 14:19:18 2009 [notice] ready for connections
Fri Oct 23 14:19:22 2009 [notice] [280] [192.168.188.92, port=3163] connect
Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3164] connect
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3165] connect
Fri Oct 23 14:19:22 2009 [notice] [312] [192.168.188.92, port=3166] connect
Fri Oct 23 14:19:22 2009 [notice] [324] [192.168.188.92, port=3167] connect
Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3168] connect
Fri Oct 23 14:19:22 2009 [notice] [348] [192.168.188.92, port=3169] connect
Fri Oct 23 14:19:22 2009 [notice] [280] [192.168.188.92, port=3163] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3164] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3165] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3170] connect
Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3171] connect
Fri Oct 23 14:19:22 2009 [notice] [312] [192.168.188.92, port=3166] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [324] [192.168.188.92, port=3167] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3168] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3172] connect
Fri Oct 23 14:19:22 2009 [notice] [348] [192.168.188.92, port=3169] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [288] [192.168.188.92, port=3171] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [336] [192.168.188.92, port=3172] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3170] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3173] connect
Fri Oct 23 14:19:22 2009 [notice] [340] [192.168.188.92, port=3174] connect
Fri Oct 23 14:19:22 2009 [notice] [296] [192.168.188.92, port=3175] connect
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3173] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3176] connect
Fri Oct 23 14:19:22 2009 [notice] [340] [192.168.188.92, port=3174] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [296] [192.168.188.92, port=3175] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:22 2009 [notice] [300] [192.168.188.92, port=3176] disconnect jid=unbound, packets: 0
Fri Oct 23 14:19:33 2009 [notice] shutting down

By: duanyanhui

duanyanhui — Thu, 22 Oct 2009 01:58:39 +0000

hello Aadm,
I met a error message box when using miranda clent to connect jabberd2 server and clicking online button , the jabberd2 server was conpiled by myself. but i try the jabberd-2.2svn752-win32.msi server that download in the website is successful, i think it may be xml file is not right.
the message box with error information is bellow:
session manager for requested domain is not available.

Pls help me once again.

By: beater

beater — Thu, 24 Sep 2009 20:15:41 +0000

trying to build under visual studio. I read this line here “open win32/jabberd2.sln and build all projects”. Where the heck is this project file? I downloaded the source and all the packages here but I do not see the VS project file.

By: gundla

gundla — Thu, 24 Sep 2009 15:50:43 +0000

also, the only change i made in c2s.xml was in the module section. i changed it to mysql. i have created the jabberd2 database in mysql and provided with right login details.

should i be making more changes in the router area or local area. please let me know.

thanks again

By: gundla

gundla — Thu, 24 Sep 2009 15:45:46 +0000

Hey, I am new to XMPP and in quest to explore it, have installed jabberd2 with the help of binaries provided here. Thanks and I think it is a great page for all windows developers. Anyways, when i try to communicate to the server thorugh pandion, i get the following errors: -

Thu Sep 24 07:37:21 2009 [notice] starting up
Thu Sep 24 07:37:21 2009 [info] process id is 3788, written to ./c2s.pid
Thu Sep 24 07:37:21 2009 [notice] modules search path: modules
Thu Sep 24 07:37:21 2009 [info] loading ‘mysql’ authreg module
Thu Sep 24 07:37:21 2009 [notice] initialized auth module ‘mysql’
Thu Sep 24 07:37:21 2009 [notice] [r] configured; realm=r, registration enabled
Thu Sep 24 07:37:21 2009 [notice] attempting connection to router at 127.0.0.1, port=5347
Thu Sep 24 07:37:21 2009 [notice] connection to router established
Thu Sep 24 07:37:21 2009 [notice] [0.0.0.0, port=5222] listening for connections
Thu Sep 24 07:37:21 2009 [notice] ready for connections
Thu Sep 24 07:58:59 2009 [notice] [356] [127.0.0.1, port=1208] connect
Thu Sep 24 07:58:59 2009 [notice] [356] [127.0.0.1, port=1208] disconnect jid=unbound, packets: 0

Could any one please point out as what am i doing wrong. The connection settings I have set on the pandion are: -
server: localhost
port:5222

Thanks a ton !!!